Diagnostic fee WAIVED with repair
11211North Brooklyn, NYResidential
Hobart

Residential Hobart Washer Repair — North Brooklyn ZIP 11211, NYC

Certified Hobart commercial technicians service all mixer, commercial dishwasher, slicer, and food prep equipment — including motor, gearbox, and control repairs.

$150–$400
Typical cost
1–2 hours
Repair time
90-Day
Warranty
  • Hobart-certified technicians
  • Same-day service in zip 11211
  • Genuine OEM parts
  • Upfront pricing
  • 90-day parts & 30-day labor warranty
(929) 699-8358

Schedule Your Repair

1st Appointment
$15 OFF
off repair cost
Return Customer
$20 OFF
off repair cost
Veteran & Military
$20 OFF
off repair cost
Senior (65+)
$20 OFF
off repair cost
1
2
3
4

Service Type

What type of service do you need?

Or call us directly:

(929) 699-8358

About Hobart Washer Repairs

Hobart is the leading commercial kitchen equipment brand, producing heavy-duty mixers, dishwashers, slicers, and food prep equipment trusted by professional kitchens worldwide.

Common Hobart Issues

  • Motor failure
  • Gearbox wear
  • Control board malfunction
  • Commercial dishwasher pump failure
  • Safety switch failure

Why Choose ProFix for Hobart

  • Hobart-certified technicians
  • Genuine OEM parts in stock
  • Same-day service in North Brooklyn
  • 90-day parts & 30-day labor warranty on all repairs
  • No fix, no fee guarantee

Hobart WasherNot Spinning in 11211

High urgency

A washer that won't spin leaves clothes soaking wet and is usually a same-day repair.

Common Causes

  • 1Worn drive belt
  • 2Failed motor coupling
  • 3Faulty lid switch or door latch
  • 4Broken drum spider
  • 5Control board failure

How We Fix It

We test the lid switch, inspect the drive belt and motor coupling, and replace the failed component.

Typical repair cost: $150–$400
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (929) 699-8358

Hobart WasherNot Draining in 11211

High urgency

Standing water at the end of a cycle is one of the most common washer problems we fix.

Common Causes

  • 1Clogged drain pump filter
  • 2Blocked drain hose
  • 3Failed drain pump
  • 4Faulty lid switch
  • 5Jammed pump impeller

How We Fix It

We clear pump filters, inspect drain hoses, test pump operation, and replace the drain pump if needed.

Typical repair cost: $150–$400
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (929) 699-8358

Hobart WasherMaking Loud Noise in 11211

Standard

Loud banging or grinding sounds during washing indicate mechanical wear that worsens quickly.

Common Causes

  • 1Worn drum bearings
  • 2Damaged drum spider
  • 3Loose concrete counterweight
  • 4Foreign object in drum
  • 5Worn shock absorbers

How We Fix It

We identify the noise source, inspect drum bearings and suspension components, and replace worn parts.

Typical repair cost: $150–$400
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (929) 699-8358

Hobart WasherWon't Start in 11211

High urgency

A washer that won't start is usually an electrical or control issue.

Common Causes

  • 1Faulty door latch
  • 2Control board failure
  • 3Broken start switch
  • 4Thermal overload
  • 5Power supply issue

How We Fix It

We test door latches, inspect control boards, and check power supply to identify and fix the root cause.

Typical repair cost: $150–$400
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (929) 699-8358

Hobart WasherLeaking Water in 11211

High urgency

Washer leaks can cause significant floor and cabinet damage if not repaired quickly.

Common Causes

  • 1Worn door boot seal (front-load)
  • 2Cracked hose
  • 3Faulty water inlet valve
  • 4Overfilling due to pressure switch failure
  • 5Damaged tub seal

How We Fix It

We inspect all water connections, hoses, the door boot seal, and inlet valve to locate and repair the leak.

Typical repair cost: $150–$400
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (929) 699-8358

Hobart WasherNot Filling with Water in 11211

High urgency

A washer that won't fill won't clean clothes. Usually a valve or pressure switch issue.

Common Causes

  • 1Faulty water inlet valve
  • 2Clogged inlet screen
  • 3Failed water level pressure switch
  • 4Kinked supply hose
  • 5Control board error

How We Fix It

We test the water inlet valve, clean inlet screens, and check the water level sensor to restore proper filling.

Typical repair cost: $150–$400
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (929) 699-8358

Hobart WasherDoor Won't Lock in 11211

Standard

Modern washers require a locked door to operate. A faulty latch prevents the cycle from starting.

Common Causes

  • 1Worn door lock assembly
  • 2Wiring harness damage
  • 3Control board communication error
  • 4Strike plate misalignment

How We Fix It

We replace the door lock assembly and check the associated wiring harness and control board signals.

Typical repair cost: $150–$400
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (929) 699-8358

Hobart WasherVibrating Excessively in 11211

Standard

Excessive vibration damages floors, cabinets, and internal components.

Common Causes

  • 1Unbalanced load
  • 2Worn shock absorbers or suspension springs
  • 3Unlevel machine
  • 4Worn drum bearings
  • 5Failed tub dampener

How We Fix It

We level the machine, inspect and replace suspension springs and shock absorbers, and check drum bearings.

Typical repair cost: $150–$400
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (929) 699-8358

Hobart WasherError Codes Displayed in 11211

Standard

The washer is displaying error or fault codes indicating a specific system malfunction.

Common Causes

  • 1Component failure triggering diagnostic system
  • 2Sensor reading outside normal range
  • 3Control board detecting abnormal condition
  • 4Door not sealing properly
  • 5Drain or fill timeout exceeded

How We Fix It

Our technician will diagnose the specific error code, identify the failed component, and perform the appropriate repair.

Typical repair cost: $150–$400
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (929) 699-8358

Hobart WasherNot Agitating in 11211

High urgency

The washer fills with water but the agitator or drum does not move to wash clothes.

Common Causes

  • 1Worn agitator dogs or directional cogs
  • 2Broken drive belt
  • 3Failed motor coupling
  • 4Transmission failure
  • 5Motor control board failure

How We Fix It

Our technician will diagnose whether the issue is in the agitator assembly, belt, coupling, or drivetrain and replace the failed component.

Typical repair cost: $150–$400
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (929) 699-8358
FAQ

FAQ — Hobart Washer Repair in 11211

Can't find your answer? Book a service call or call us now.

Still have questions?

Our NYC team is ready — same-day service across Brooklyn and Queens.

Hobart Washer Broken? We're in 11211 Today

Residential repairs · All issues · 90-day parts & 30-day labor warranty

CallBook