Commercial Sharp Oven / Range Oven Not Heating — Flushing ZIP 11356, NYC

A dryer that blows cold air is almost always caused by a blown thermal fuse. This is a safety device that burns out when the dryer overheats — usually due to a clogged exhaust vent. We replace the fuse AND clean the vent to prevent it from blowing again.

Yes — a restricted exhaust vent is the leading cause of thermal fuse failure in dryers. When the vent is blocked, heat builds up, the safety thermal fuse cuts power to the heating element, and your dryer stops heating. We clear the vent as part of every dryer heating repair.

A thermal fuse replacement costs $100–$180. Heating element replacement (electric) costs $150–$280. Gas valve coil replacement costs $130–$250. We always diagnose first to identify the exact failing component.

The heating element is a coiled resistance wire inside an electric dryer that generates heat when electricity passes through it. Signs of failure include no heat at all, heat that shuts off mid-cycle, or clothes that take 2+ cycles to dry. A multimeter test confirms whether it has continuity.

Gas dryer heating failures are usually caused by failed igniter, faulty gas valve coils that control gas flow to the burner, a tripped thermal fuse, or a defective radiant flame sensor. Gas dryers require a qualified technician for safe diagnosis and repair.

Yes — a blocked vent causes heat buildup that is a leading cause of home fires. According to FEMA, dryer fires cause approximately 2,900 home fires per year. After any dryer heating repair, we inspect and clear the full exhaust path as a safety measure.

Ovens that don't hold temperature are usually caused by a faulty temperature sensor (RTD probe) or a weak bake/broil element. Power fluctuations common in older NYC buildings can also damage oven control boards. We diagnose with a digital thermometer test and replace the failing component.

Yes. A worn or damaged oven door gasket causes heat loss, longer cooking times, and wasted energy. We replace oven door gaskets for all brands and can also realign doors that have dropped or warped over time.

A brief gas smell when lighting is normal — that's unburned gas before ignition. A persistent gas smell or a smell after the oven is lit is NOT normal and requires immediate attention. Turn off the oven, ventilate the kitchen, and call ProFix at (929) 699-8358.

Yes. Our technicians are factory-trained and certified for Sharp appliances. We use genuine OEM Sharp parts for all repairs, which is required to maintain your warranty and ensure the highest quality repair.

Repair costs vary by appliance type and issue. Typical Sharp appliance repairs in New York City range from $120 for simple fixes to $450+ for compressor or control board replacements. We provide an exact upfront quote before starting any work.

In most New York City zip codes we offer same-day service. Call before noon and we can usually have a technician at your door within 2–4 hours. We service all Brooklyn (112xx) and Queens (113xx–114xx) zip codes.

Yes. Our technicians stock the most commonly needed replacement parts for all major brands. Most New York City repairs are completed in a single visit — no waiting for parts to be ordered.